New: Soviet People's Militia squad box from Warlord Games

Soviet Peoples Militia squad box from Warlord Games is up for pre-order, this one appears in the Stalingrad book and hopefully also on my table soon...

Order here: https://store.warlordgames.com/collections/pre-orders/products/soviet-peoples-militia-squad

  164 Hits
  0 Comments
164 Hits
0 Comments

Soviet cavalry conversion - first half finished

Even more
valhallagames

content!
Latest Podcast

Icon Pod
Latest Video
Icon Vid2

Soviet cavalry conversion - first half finished, some quick "its nearly midnight" photos, I'm pretty happy with them. Just need to purchase three more the same and then to find some sabres from somewhere to stick on.

Click on the magnifiing glass for a larger image.

The paint guide is here (work in progress horse colours to be added shortly)

  690 Hits
  0 Comments
690 Hits
0 Comments

Soviet winter army nearly finished....

Soviet winter army nearly finished.... here are all the extra spotters for my inexperience mortars and other indirect fire units (??). 

Most of these came into being with only 3 days to go until MOAB 2019. Finally getting round to finishing them off, just a few canteen lids and a clear coat once the weather improves. Then I have to go through the rest of the army and see what didn't manage to get a second highlight and finally 4 vehicles, OK perhaps not nearly finished but perhaps the beginning of the end.

  427 Hits
  2 Comments
427 Hits
2 Comments

Soviet artillery clone wars

Continuing with my preparation for Moab 2019 I now have my 3d printed soviet medium howitzer painted up and ready to go, what it is missing is anyone to actually fire it. Being a 3D printed model of course it didn't come with any miniatures so off I went to the wargaming store to purchase Zis-2 anti-tank miniature (that I didn't really want) and team in order to get the crew miniatures because you can't buy the crew by themselves. 

Once I get them home, scraped off and ready to start painting I wondered if in fact being such a large gun it was only supposed to have 3 crew like the Zis 2 so I went to the rule book and had a look in fact it needed 4. Oh, there's a problem, in fact needed 5 because one of the main reasons that I took this unit over another Zis 3 was that it can have a spotter*. While I was on the job I had a quick look at my Zis-3 and to my surprise this unit actually has 4 crew as well even though only 3 come with the model!
Looking over the rest of the build I notice that my medium mortars have the required three guys but again no spotters soooo… in fact for my entire army including the Zis 2, Zis 3, medium artillery and 2 medium mortars (not that I would realistically use all of that at once) I am actually missing a total of 8 crew and spotter models so what's a man to do? Bear in mind at this point it's a week till the event and I still have to assemble paint and base all of these!

Solution; clone wars.
Obviously, I wouldn't do this to sell and honestly if I could just purchase the guys I would but I can't so out with mould making silicone and resin and "a while" later I have my 8 extra. I don't have a casting pressure pot and degas chamber so there are some small holes, and a few miscasts for the bin but at least now I'm ready to paint. 50 minute demold allows for a pretty quick turnaround.

The saga continues, now I only have 3 days to paint all of this and finish the rest of the army and "a fun challenge" is starting to wear a bit thin, more to follow.

Images below:

50% of the mould made
Completed mini, just needs a few holes filled and ready to paint
  646 Hits
  2 Comments
646 Hits
2 Comments

DIY medium artillery piece - 3D printing

I have always wanted a 3D printer just the same as I have loved the idea of making a mold and casing things. That concept of "Xeroxing" something in 3D really gets me going, perhaps it's the wargamers "more, more, more miniatures" thing where your army is never big enough and certainly one army is never enough. Sadly, I don't have a 3D printer, its not that I couldn't afford to get one I guess, its more like a recovering alcoholic shouldn't have "just one drink". I already have enough in my personal life plus wargaming plus photography plus wargaming-photography, now plus blogging and podcasting and videography as well I really don't need another hobby…. do I…?

However, the 3D printing came in handy in preparation for the Sydney MOAB 2019 wargaming event in which I decided to take an artillery heavy soviet WWII force to play bolt action.

I went to purchase a medium artillery piece from Warlord games, hmm nothing there... OK what about Rubicon, hmm nothing there either. Finally, a general web search for 1/56 scale soviet medium artillery models revealed exactly …. Zero.

With time running out what is a man to do? One thing that my web search did uncover was a free 3D print model of a Soviet A-19 122mm gun.

https://www.thingiverse.com/thing:2774391/

Now, even though I don't have a 3d printer I have a good mate Nathan who has one at his work, and being a fellow soviet player I though an offer of a free gun for him might entice him to print one for each of us, he took the bait and in a day or so I got a message to say the first one was done (sort of).

Now this is Nathans first try with the 3D printer and I don't know how good the free model was as well so I wasn't expecting too much but when I received the model, I was really pleased even though I could see there was a bit or work to be done and that plastic is HARD.

I got stuck in with scraper and sandpaper and a small grinder and some plastic putty and a few hours later I had something was passable. (See the progression of images below.)

So how did I go with my first impression of 3d Printing. On the plus side, in 4 hours I had a completed model exactly what I wanted, for exactly zero dollars. No postage no purchase and no waiting. Looking at the quality well its hard to just because this was a first effort, in the end the quality is passable, but it took a fair amount of work. Nathan says the second one looks a lot better and I assume different printers would give a better (or worse) result. 

I'm looking foreword to the future, if I could have purchased one (with crew) I would have done that instead, but if I need 2 or 3 (or 10!)... rock on 3D printing.

So now I have the gun the next thing I don't have is any crew, the story continues… 

THANKS Nathan!

More images below...

Continue reading
  609 Hits
  2 Comments
609 Hits
2 Comments

Friday Photo: Rex's MOAB 2019 army

Historical background:*
Despite the losses it suffered in the defensive phase of the battle of Kursk, the Red Army managed to go over to a very successful offensive within two weeks, pushing the Germans back to the Dnieper and towards western Ukraine, overall Kursk campaign was a disaster for the Germans.

The Kursk campaign was a decisive Soviet success. For the first time, a major German offensive had been stopped prior to achieving a breakthrough.

In the morning of 3 Nov 1943, German 4th Panzer Army stationed in Kiev, Ukraine was surprised by a massive artillery and aerial bombardment, followed by advancing Soviet troops. After two days of action, Soviet troops entered a city not yet recovered from the battle in the previous year, and now further damaged by both the intense Soviet invasion and the scorched-earth German retreat. Kiev suffered 7,000 buildings, which included about 1,000 factories, plundered or destroyed at the hands of the Germans. 200,000 civilians were killed during the course of the war. 100,000 civilians were sent to concentration camps during the occupation. What resulted was a city with only 80,000 survivors, a mere 20% of its pre-war size.

Erich von Manstein of German 4th Panzer Army was able to convince Adolf Hitler to release German 48th Panzer Corps to conduct a counter attack, though his request for the inclusion of German 40th Panzer Corps was rejected. German troops drove forward, but they were halted by Soviet 7th Guards Tank Corps near Fastov. Similar scenarios played out all around Kiev with German troops fighting fiercely but unable to halt the Soviet juggernaut. The Germans caught their break with the arrival of German 48th Panzer Corps containing the elite 1st SS Panzer Division, retaking Brusilov and Zhitomir, two towns that the Soviets had recently captured. Large scale tank engagements ensued with heavy casualties on both sides over the course of the following month.

Outcome:
Although the Soviets emerged victorious, they failed to achieve the important objective of enveloping German Army Group South. Nevertheless, they were able to deal heavy damage to German 4th Panzer Army, and the morale boost for gaining Ukraine was substantial.

*According to some guys on the internet...

You didn't really think I was going to give away the army composition did you? ;-)
  675 Hits
  0 Comments
675 Hits
0 Comments

Trucks, lots of trucks

Trucks, lots of trucks, multi use USA and soviet lend lease. Finally finished except the pintle-mounted MMG's (and perhaps some paint). These are from https://rubiconmodels.com/. Just one hint if you are planing to purchase the Studebaker truck make sure you get the Katyusha kit instead as it comes with the truck deck anyway.

Three trucks. The Katyusha is magnetized so it can be swapped out with the truck deck.
The truck chassis showing magnet.
The full set, all the truck chassis are more or less the same so I can swap in the Katyusha, open decks which will have the MMG permanently mounted. Also eventually the covered decks representing trucks without a gun.
  692 Hits
  1 Comment
692 Hits
1 Comment

Rex's Soviet paint recipe available to download now

Even more
valhallagames

content!
Latest Podcast

Icon Pod
Latest Video
Icon Vid2

I have uploaded my Soviet winter paint recipe here. I'm not the best painter in the world but if this helps someone then great.

  939 Hits
  2 Comments
939 Hits
2 Comments

Rex's winter Soviets; Hobby update #3

 Rex's winter Soviets; Hobby update #3 Deep snow plus bonus indirect fire... still not there yet but close. Click on the image for the full sized version.

  1014 Hits
  2 Comments
1014 Hits
2 Comments

Urban test model finished

Urban test model finished, first time I have ever done a test model only 1 or 2 steps ahead of the rest of the army. OK, no time for talking I have to paint!
 

  723 Hits
  0 Comments
723 Hits
0 Comments

Rex's winter Soviets; Hobby update #1

Even more
valhallagames

content!
Latest Podcast

Icon Pod
Latest Video
Icon Vid2

 Here is a quick video showing my current project, winter Soviets. I point out a couple of things related to how I model up my guys. 3 weeks now till I go on my Fortress Budapest campaign day. For details on that check out the podcast EP7

  723 Hits
  5 Comments
723 Hits
5 Comments

Latest podcast

Podcast EP13: "Freeze Frame"...:

The latetst podcast episode is live now. This should appear in your podcast app if you have subscribed (Search for valhallagames podcast in your app) or you can listen on the web player here

Episode 13:

Join Rex and Dan in this episode of the Valhallagames podcast where we talk miniature photography (a LOT of miniature photography!). Note the show times below if you want to skip over parts that aren't relevant to you or your camera type.

In our usual segments we also talk hobby, plastic and metal lust and what we are reading and looking forward to playing.

Timestamps and "show notes"  here